vSRO Çözüldü C9 VE SUNUCUDA OYUN 10 SN SONRA DC YİYOR

reanback

.
Aktiflik: 1%
Muhafız 50 mesaj
Katılım
18 Eki 2019
Mesajlar
86
Çözümler
2
Tepkime puanı
16
Puan
8
Yaş
25
Konum
Kocaeli
Thread owner
Merhabalar,

Sunucumda kendim manuel şekilde oyunu kurdum fakat ilgili oyunu sunucuda start verdiğimde 10 sn sonra dc yemektedir.
Buna istinaden kendi local pc de denemeye kalktığımda C9 Hatası ile karşılaşmaktayım konu hakkında desteklerinizi rica ederim.
 
Çözüm
Merhaba,

the two errors you requested are as follows.
The issue is likely caused by incorrect configuration in the SrNodeData ini file. Specifically, the problem is related to the port settings and firewall rules:

The ports defined in SrNodeData in ini must be opened in the server's firewall settings to allow proper communication between the client and server.
Once the ports are correctly configured and allowed through the firewall, the C9 error on your local PC should be resolved.
Thread owner
Merhaba,

talep etmiş olduğunuz iki hata aşağıdaki gibidir.
 

Ekli dosyalar

  • 1753538285896.png
    1753538285896.png
    13.2 KB · Görüntüleme: 46
Oyla 0
Merhaba,

@Thor hocamın söylediğine ek olarak lütfen forumda konu açmadan önce önce forum içerisinde araştırma yapalım.Belki de sorununuz daha önce başkaları tarafından yaşanmış ve çözülmüş olabilir.

Keyifli forumlar.
 
Oyla 0
Merhaba,

the two errors you requested are as follows.
The issue is likely caused by incorrect configuration in the SrNodeData ini file. Specifically, the problem is related to the port settings and firewall rules:

The ports defined in SrNodeData in ini must be opened in the server's firewall settings to allow proper communication between the client and server.
Once the ports are correctly configured and allowed through the firewall, the C9 error on your local PC should be resolved.
 
Oyla 1
Çözüm
1753538689927.png

sorunun burayla alakalı, forumu araştırırsan hem çalışma mantığını anlamış olursun hemde ilerideki sorunlar için kafanda bir süreç oluşabilir, ayrıca İİS ayarlarındaki portun Server.cfg içerisinde yazan portla eşeştiğini kontrol et
bkz: 8080

1753538842429.png
 
Oyla 0
Oyla 0
The issue is likely caused by incorrect configuration in the SrNodeData ini file. Specifically, the problem is related to the port settings and firewall rules:

The ports defined in SrNodeData in ini must be opened in the server's firewall settings to allow proper communication between the client and server.
Once the ports are correctly configured and allowed through the firewall, the C9 error on your local PC should be resolved.
Thank you for solving the problem @Kabloz™ :)
 
Oyla 0

Bu konuyu görüntüleyen kullanıcılar

Geri
Üst Alt